You are not logged in.
Pages: 1
just found theses on ebay , bit on the expensive side
http://www.ebay.co.uk/itm/captain-recli … 6016.l4276
Offline
Won a drivers side swivel plate last night for £38. That will be two plates for £73 posted what i think was quite good, well chuffed
Offline
Thats a good price cheep as chips ,Ive seen swivels for vw T3s go for silly money in the past more than double what you paid just for one secondhand one,
Now its time to fit them, keep us posted with pics
there are some tips on fitting them on standard seats on FurgoVW
useful pics here http://www.furgovw.org/index.php?topic= … msg1575340
Last edited by monkeynut (2016-05-23 20:45:05)
Offline
I got one a few weeks ago mate and it went in easy enough. Scroll down this page.....
http://mytintent.blogspot.co.uk/p/page-six.html
Having a good look at the drivers seat today the mounts that are above the runners are a perfect fit to the holes in the plate so looking to put this one over rather than under the runners. Hopefully clearing the handbrake when applied.
Offline
Looking at the Spanish guys job using the same swivels as you , he has put it under the sliders and it just clears the hand brake with a bit of filing, see pic below
you seats are in good nick mine are worn n riped hence the covers
http://dispatchexpertscudo.org.uk/forum … 3/seat.jpg
Last edited by monkeynut (2016-05-23 23:28:09)
Offline
If i dont pull my passenger one fully forward the back of the runner scrapes along the door card pocket. Every time it happens i say to myself "i must get the angle grinder out and make new stops"
One day
Offline
I need to grind off the front stops of my passenger rails so the seat slides back up against the dash board, for them extra few inches
Last edited by monkeynut (2016-05-24 15:07:27)
Offline
Not bad for under 80 quid
Offline
Not bad for under 80 quid
That's a bloody great result mate! Looks brilliant - opens up so much space too doesn't it.
Good job again
2006 Citroen Dispatch 2.0HDi bought in July 2013 - Partial camper conversion ........
Offline
opens up so much space too doesn't it.
Does it not. That is me sitting on the bench come bed i made taking that picture so as you see plenty room for four adults to sit quite comfortably talking crap over a few beers on summer evenings. Cant wait to crack on and finish this.
Had some shit cards dealt the past week so things are on hold for a couple of weeks but hopping to get this finished soon to get a few weekends away before our jolly to Germany and Holland come September.
Offline
Great job, but under £80??? Eh?
I can't seem to find any swivel plates for cheaper than a new set- £200 for a pair. I don't want to buy some new seats, I want to keep the same seats I've got in now because they're great- same models you've got Casper- not too soft not too hard so I can stay awake when driving long distance. Any tips on picking some up cheap eg where/what to search for etc? I was also thinking about taking out the low bit of bulkhead in mine but the holes in it makes a pretty good anchor point for a safe, so do you get more space taking it out? Because the seats are on the same mounting point right? And they can't go back any further because of the dashboard...
My mate randomly turned up with some spare LED bulbs to replace the interior lights in the van. Popped them in in 2 minutes and was pretty chuffed with myself. Now when it's dark at night and I open the door I'm half blind because the cab lights up like I replaced it with a floodlight. Hmmm. This is my van, there are many like it, but this one is mine.
Offline
I got them both on ebay mate but not at the same time Bottom of page five is my N/S one and page six the O/S
http://mytintent.blogspot.co.uk/p/page-six.html
Measure your bolt holes. Front left to right and back to front and just look out for deals. The first one i was lucky the guy did not know its value so it was buy now at £30. The other i was lucky the advert finished late at night so it looks like other bidders went to bed. I dont search for ones for the van brand. I just looked for swivel seat base or van swivel base. There is a pair 2nd hand now for buy now at £130 from a VW so ask the seller the bolt hole distances
Offline
Nice Job Casper cant beet that for 80 qud ,
Ive had no internet for a while,but soon as i got back on ebay theese popped up
http://www.ebay.co.uk/itm/Two-swivel-se … 6016.l4276
but looks like no bases
forgot to say they are 806 seats
Last edited by monkeynut (2016-06-10 10:45:45)
Offline
I need to try and lower my drivers side. Its as low as it will go but i had to take out the sun visor to see ahead properly. Bloody shame as i clear the handbrake when on. All i have to play with is the plastic spacers under the base so stanley blade out teh base shape in the rubber mat and padding.
Offline
The bases on the 806 seats are not as high as the van ones also they have smaller plastic spacers , the van ones are about 2cms.
Mine are just about bob on but i have on the lowest position as im 6ft 2 !
Offline
Yeah im 6'2" also. My passenger one came out a Scudo so i wonder if they have lower bases. Ill live with it just now its just odd being so high but at least im looking down on the clocks more so can see all my idiot lights
Offline
http://www.ebay.co.uk/itm/PEUGEOT-807-C … 1138651709
Because ive searched for them alot in the past they pop up on my ebay homepage still. so any more that pop up that will fit directly i will post in this thread
Last edited by monkeynut (2016-06-18 01:27:01)
Offline
another good pair !
http://www.ebay.co.uk/itm/Peugeot-806-c … Swwo1Xeo~F
Offline
Offline
If I remember rightly the 806 handbrake lever had the ability to be lowered while remaining on so the seat could swivel, so if handbrake clearance is a problem maybe an 806 lever might be a solution.
Offline
Mine is the Scudo handbreak it drops down too just pull the button they lay flat
Offline
Pages: 1