You are not logged in.
Pages: 1
Hi everyone, finally found a single passenger seat so now comes the swivel bit! Will a pair of these work does anyone know?
Look at this on eBay http://www.ebay.co.uk/itm/261299274560
Offline
check the width when i was thinking of just swivels most where to narrow for the scudo , otherwise its fine , , casper is the one to ask he fitted swivel plates , i put complete 806 seats and bases in no faffing about bu tgetting hard to get hold of
Offline
At that price these might be worth buying for the swivels alone.
Don't know what other seats they might accommodate... monkeynut???
Offline
pity they haven’t the bases as well would have been a strait swap as the bases are lower and level where as the scudo is on an angle,, i bet the they will fit though
Offline
Offline
Had i been further into my build i would have had them
Offline
theses 806 / synergie / Ulysse seats have just popped up on flea bay just the thing bases drawers the lot ,, http://www.ebay.co.uk/itm/CAPTAIN-SWIVE … 2406160146
Last edited by monkeynut (2017-01-29 22:33:02)
Offline
theses 806 / synergie / Ulysse seats have just popped up on flea bay just the thing bases drawers the lot ,, http://www.ebay.co.uk/itm/CAPTAIN-SWIVE … 2406160146
They look to low for me. I really only need one swivel (Passanger) so was looking at fronts from a Mondeo as they are common as muck. I can get two leather for 50 quid use my base and buy a 2nd hand swivel. I have empty space in my bases so plenty storage space. Ill put sides and a back in and get plastic drawers. All i think i need to do with the seats is move the lower runners mount bolt holes.
Offline
I have empty space in my bases so plenty storage space. Ill put sides and a back in and get plastic drawers. All i think i need to do with the seats is move the lower runners mount bolt holes.
Me too.
I reckon there's 50 ltr + of good square storage space under there and with so many sizes of plastic boxes available I have found good fits for them. Mine are already boxed in on three sides though so accessible only through side doors.
Offline
Im pondering buying a safe OAT. If a do that will go under one but its handy for things like the sat nav or anything of value to chuck it out of sight.
Offline
The boxes on mine could easily have a hinged locking door attached with hidden or tamperproof fixings. May do one front one that way. They are quite a bit smaller than the rear but then... I have little of value.
But as Mr Zimmerman said "If you ain't got nothing, you got nothing to lose".
I am hoping to find another litre or two with pockets behind cutouts in the rear door cards too. Every little helps.
Offline
I am hoping to find another litre or two with pockets behind cutouts in the rear door cards too. Every little helps.
Not got a picture but if you get a chance look inside a convoy door. The pockets are bloody massive but they are at the bottom what tuck into the foot well. No danger with my Orangutan arms can i reach them sitting in the seat. They have the cheek to make one a bottle storage. I need to make something for half way up to even have a chance to get some water when driving.
Offline
Should have stuck with the expert...
Bargain at only £42.00 and free p&p too :-
Offline
Should have stuck with the expert...
Bargain at only £42.00 and free p&p too :-
Good god OAT i am a jock. Got these last year for the wifes car
http://www.ebay.co.uk/itm/New-Car-Van-T … SwPcVVpivJ
Yes 99p posted from Hong Kong. Kit the window hook off and self tapper screw into door. Jobs a good un.
Offline
I would hope at £42.00 they come with a voucher for lifetime Greggs refills.
Tight arse.
Half Yorkie, half Jock that I am, I lashed out on the deluxe folding model:-
http://www.ebay.co.uk/itm/Universal-Car … 2086604310
But I have been known to screw a big jubilee clip to the dash.
Offline
Lol. Worked in Bradford for over a year in the mid 80's. That lot are tighter than us jocks
Offline
Looking for a bit of guidance hopefully. We've picked up a '98 Expert with a Stimson Tirol conversion, but at some point the drivers side swivel has been removed (passenger one still there & working) and the single rear seat & base on the drivers side.
So we're looking for a swivel for the drivers seat and a rear passenger seat (and base it bolts to if possible) we know it's hard finding this stuff, so any help/advice appreciated.
If I could figure how to post a pic on here, I'd post a pic of the seats that are in it.
Thanks in advance
Offline
Looking for a bit of guidance hopefully. We've picked up a '98 Expert with a Stimson Tirol conversion, but at some point the drivers side swivel has been removed (passenger one still there & working) and the single rear seat & base on the drivers side.
So we're looking for a swivel for the drivers seat and a rear passenger seat (and base it bolts to if possible) we know it's hard finding this stuff, so any help/advice appreciated.
If I could figure how to post a pic on here, I'd post a pic of the seats that are in it.
Thanks in advance
Look under seat and the bolts holding the lower runner into the frame measure the distance front to back and back left to right. Once you have that go buy a swivel plate to fit. I bought to from here for 120 quid
http://www.ebay.co.uk/usr/jennings-seat … 2749.l2754
They were cheap as tehy are small so adapted them with cross beams but i have wide runners in my van (LDV with Corsa seats) Once you have your plate unbolt seat and runner from base and bolt swivel to base then seat to swivel. You may need to drill a couple of new holes as they cant fit all vans bob on. It is that simple.
Offline
Thanks for that ... now if only I figure out how to get a pic on here, the "help" just confused me further
Offline
Join this site and upload your pictures
Open your picture fully and click share then copy the hotlink for forums link and paste here
Offline
Offline
Pages: 1