The Dispatch | Expert | Scudo Hub

RMR

Member

Registered: 2023-10-10

Posts: 3

Dual mass flywheel and locking tool

Hi

Is anyone able to advise which DMF fits a 2014 scudo 2.0D multi jet 130hp. I’ve searched online and can’t seem to find a DMF that shows it fits my van, there appears to be options listed on sites like AUTODOC etc but some show different diameters and number of teeth. If I put my registration in then the usual response is they do not fit my van, yet manually inputting an expert, dispatch, scudo brings up various sizes, teeth etc.

Also is there a cost effective flywheel locking tool readily available to do the cam belt asap

I hope someone can advise.

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 875

Re: Dual mass flywheel and locking tool

Not a lot on the later models here yet but someone may know.

If you can't find a definitive answer I would try asking one of the sellers.  If you get their confirmation of a fit via email they couldn't avoid a refund at least.
In fact if you use ebays "My Garage" and "Assured Fit", ebay refund you themselves and recoup from the seller if any problem.

RMR

Member

Registered: 2023-10-10

Posts: 3

Re: Dual mass flywheel and locking tool

Thank you for the response.
It seams rather odd that there are no reputable parts suppliers able to supply a DMF for this van, there’s a lot of them around. The Fiat part number draws a blank with everyone. There appears to be dmf’s available for the 120hp, 136hp and 163hp on large parts supplier listings but as soon as you input vehicle reg or part number, they all say don’t fit!
Surely one must fit from a Peugeot or Citroen or Toyota
Hoping someone sees this and sheds some light. Dealer parts are obv a lump more expensive

Last edited by RMR (2023-10-12 21:55:38)

RMR

Member

Registered: 2023-10-10

Posts: 3

Re: Dual mass flywheel and locking tool

Checking again, it appears a DMF for either scudo, dispatch or expert as a 128hp (130) model is not available on any of the major sites.

tee_cee

Member

Registered: 2016-03-18

Posts: 525

Re: Dual mass flywheel and locking tool

I have a Peugeot 2015 DW10CD 128hp, so was interested in this.
Oddly my search for the flywheel here https://www.ilcats.ru/peugeot/?function … anguage=en comes up with part 0532Y1, which is not dual mass.