The Dispatch | Expert | Scudo Hub

garlicmobile

Member

Registered: 2020-08-07

Posts: 1

Help locating sheet metal engine mounting bracket

Hello Folks,

My 2002 2.0HDI Dispatch has 175000 on but drives like a spring chicken and I love it.
I am however in the process off sorting a few rust problems.

There is not much left of this sheet metal bracket which bolts onto the chassis and holds the gearbox side engine mounting.

I'm really struggling to find another; they all seem to have been taken or are totally rusted with holes on the scrap vans I've found.

Has anybody come across a good source for parts like these / drawn one and had it made up /or spotted a newly arrived Mk1 dispatch arrive at their scrappers?

Any help much appreciated.

part no. 1813 42

Thanks for any help

Last edited by garlicmobile (2020-08-07 15:05:04)

Jantheman

Member

Registered: 2023-06-08

Posts: 2

Re: Help locating sheet metal engine mounting bracket

Hi, I've got the same issue. Did you manage to source this part?

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 875

Re: Help locating sheet metal engine mounting bracket

Anything here? :-

https://www.eurocarparts.com/engine-mount

edit.... I think not.  I see it's the mounting plate you need.

Might be worth asking them.

Last edited by OAT (2023-06-08 21:57:40)

JohnDragonMan

Member

From: Derby, East Midlands, UK

Registered: 2020-06-02

Posts: 387

Website

Re: Help locating sheet metal engine mounting bracket

here it is on FiatFourm's ePER:
http://eper.fiatforum.com/eper/navi?MOD … &DRW_NUM=2

Fiat part numbers: 1489763080, 1401152880

ill see what i can find...

Last edited by JohnDragonMan (2023-06-09 20:26:38)

---

- JohnDragonMan
Notice: I have the tendency to void warranties, blow fuses, cause fires, and other fun stuff.
Words of wisdom: Internally rust proof the sills and subframe! both skins!!. There's always user serviceable parts inside. "Oh that shouldn't have happened".
My Crazy Mk2 2005 Dispatch Camper Project

Jantheman

Member

Registered: 2023-06-08

Posts: 2

Re: Help locating sheet metal engine mounting bracket

Thanks a lot guys! I'm in Iceland for summer and unfortunately can't find it here so will ask my coworker to fabricate a replacement. It was quite easy to get it out, bottom two bolts are gone so it'll have to hold just on top two bolts.
Will post pic once it's done.

zeem

Member

Registered: 2023-09-18

Posts: 2

Re: Help locating sheet metal engine mounting bracket

In case anyone else comes across this problem, it appears that the 2007-2016 vans use the same basic bracket, which might make a replacement easier to find. The following picture shows my old one from my 2006 2.0 HDi, and the replacement I found on eBay (after I cleaned and painted it). This was described as being from a 2007-2016 1.6 HDi.

Two differences:

• The new bracket uses threaded studs and nuts, instead of bolts and captive nuts. This shouldn't make any difference

• The pipe clip bracket on the side was absent. I cut the old one off, repaired the rusted-out lower section, and welded it onto the new bracket

Last edited by zeem (2023-10-18 08:36:24)