The Dispatch | Expert | Scudo Hub

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,092

Spare wheel carrier

Looking for one but what one. I presumed they would all be the same up to the Mk2. Ebay throws up two versions. What is yours like?

01

02 what i think i had in my last van

I cant how any of these would fit my van hangers? Is it a bold and split pin at the pivot points or just a but steel from the hanger poking into the hole.

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,182

Re: Spare wheel carrier

All 4 of mine look like 02

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,092

Re: Spare wheel carrier

All 4 of mine look like 02

Yeah the dearer one

I presume it just hooks in at what would be the top in the picture and that extra cup/cover to the right is a heat shield.

Ill see what i can find closer as i am not paying 40 quid for that. Garage i got my ash tray from plonked there one on old car parts and it had no wheels. Underside is crushed so cant see one being any good on that.

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 875

Re: Spare wheel carrier

Mines like the 02 one as well.

The pegs at the back pivot in the holes in the hangers with the other end pulled up to the floor with a bolt and hook.  The plate is a heat shield.

ruston

Member

Registered: 2017-01-31

Posts: 27

Re: Spare wheel carrier

My 2006 model has the 2nd type.  That first pic looks more like the cradle for the fuel tank?

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,092

Re: Spare wheel carrier

My 2006 model has the 2nd type.  That first pic looks more like the cradle for the fuel tank?

I was looking at them again (on ebay) after i posted this but thinking "is this from a later model" then i seen the bolt holes what clicked fuel tank.

Ebay advert

https://www.ebay.co.uk/itm/Fiat-Scudo-C … ctupt=true

E7 Tank

https://www.ebay.co.uk/itm/Complete-Fue … 1553827551

vaz2121

Member

From: Glasgow Living:~ SW. Scotland

Registered: 2015-08-31

Posts: 1,311

Re: Spare wheel carrier

Looking for one but what one. I presumed they would all be the same up to the Mk2. Ebay throws up two versions. What is yours like?

01

https://i.postimg.cc/Kv7m23y0/SWC2.jpg

02 what i think i had in my last van

https://i.postimg.cc/Z5T4KYb4/SWC1.jpg

I cant how any of these would fit my van hangers? Is it a bold and split pin at the pivot points or just a but steel from the hanger poking into the hole.

https://i.postimg.cc/Gh9JDs3Z/20190512-124125.jpg

Mine also looks like 02

Ian Hawkins

Member

Registered: 2023-06-01

Posts: 2

Re: Spare wheel carrier

Hi guys,
sorry to jump on an old thread but how would I remove the one like the 02 picture please? Can't see an obvious way other than bending the brackets and wrestling it out!

Thanks

Zippypilot

Member

From: Sussex

Registered: 2019-06-25

Posts: 112

Re: Spare wheel carrier

Hi, mine is like the 02 one, I have a 2002 dispatch 2.0 hdi

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 875

Re: Spare wheel carrier

Hi guys,
sorry to jump on an old thread but how would I remove the one like the 02 picture please? Can't see an obvious way other than bending the brackets and wrestling it out!

Thanks

I haven't tried but now I think about it I don't know.

Is at least one of the hangers bolted on?  I doubt it and would be rusted solid anyway.

Otherwise must be just enough spring in the steel to detach.  Awkward to get at without a pit though.  Try a loop of nylon rope wound up with a stick in the middle to compress the cage.

Ian Hawkins

Member

Registered: 2023-06-01

Posts: 2

Re: Spare wheel carrier

Hi guys,
sorry to jump on an old thread but how would I remove the one like the 02 picture please? Can't see an obvious way other than bending the brackets and wrestling it out!

Thanks

I haven't tried but now I think about it I don't know.

Is at least one of the hangers bolted on?  I doubt it and would be rusted solid anyway.

Otherwise must be just enough spring in the steel to detach.  Awkward to get at without a pit though.  Try a loop of nylon rope wound up with a stick in the middle to compress the cage.

There is a bolt half way up the OS bracket but not sure what for. Will get under it and have a proper look  - thanks for the advice