The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

You are not logged in.

#1 2020-08-07 14:27:23

garlicmobile
Member
Registered: 2020-08-07
Posts: 1

Help locating sheet metal engine mounting bracket

Hello Folks,

My 2002 2.0HDI Dispatch has 175000 on but drives like a spring chicken and I love it.
I am however in the process off sorting a few rust problems.

There is not much left of this sheet metal bracket which bolts onto the chassis and holds the gearbox side engine mounting.

IMG_1031.jpeg

I'm really struggling to find another; they all seem to have been taken or are totally rusted with holes on the scrap vans I've found.

Has anybody come across a good source for parts like these / drawn one and had it made up /or spotted a newly arrived Mk1 dispatch arrive at their scrappers?

Any help much appreciated.

part no. 1813 42
IMG_1032.jpeg

Thanks for any help

Last edited by garlicmobile (2020-08-07 15:05:04)

Offline

#2 2023-06-08 14:03:32

Jantheman
Member
Registered: 2023-06-08
Posts: 2

Re: Help locating sheet metal engine mounting bracket

Hi, I've got the same issue. Did you manage to source this part?

Offline

#3 2023-06-08 21:51:03

OAT
Member
From: Borders/Dales
Registered: 2017-01-03
Posts: 911

Re: Help locating sheet metal engine mounting bracket

Anything here? :-

https://www.eurocarparts.com/engine-mount

edit.... I think not.  I see it's the mounting plate you need.

Might be worth asking them.

Last edited by OAT (2023-06-08 21:57:40)

Offline

#4 2023-06-09 20:17:44

JohnDragonMan
Member
From: Derby, East Midlands, UK
Registered: 2020-06-02
Posts: 402
Website

Re: Help locating sheet metal engine mounting bracket

here it is on FiatFourm's ePER:
http://eper.fiatforum.com/eper/navi?MOD … &DRW_NUM=2

Fiat part numbers: 1489763080, 1401152880

ill see what i can find...

Last edited by JohnDragonMan (2023-06-09 20:26:38)


- JohnDragonMan
Notice: I have the tendency to void warranties, blow fuses, cause fires, and other fun stuff.
Words of wisdom: Internally rust proof the sills and subframe! both skins!!. There's always user serviceable parts inside. "Oh that shouldn't have happened".
My 2005 Dispatch Camper Project big_smile

Offline

#5 2023-06-18 19:58:34

Jantheman
Member
Registered: 2023-06-08
Posts: 2

Re: Help locating sheet metal engine mounting bracket

Thanks a lot guys! I'm in Iceland for summer and unfortunately can't find it here so will ask my coworker to fabricate a replacement. It was quite easy to get it out, bottom two bolts are gone so it'll have to hold just on top two bolts.
Will post pic once it's done.

Offline

#6 2023-10-17 22:51:26

zeem
Member
Registered: 2023-09-18
Posts: 2

Re: Help locating sheet metal engine mounting bracket

In case anyone else comes across this problem, it appears that the 2007-2016 vans use the same basic bracket, which might make a replacement easier to find. The following picture shows my old one from my 2006 2.0 HDi, and the replacement I found on eBay (after I cleaned and painted it). This was described as being from a 2007-2016 1.6 HDi.

Two differences:

  • The new bracket uses threaded studs and nuts, instead of bolts and captive nuts. This shouldn't make any difference

  • The pipe clip bracket on the side was absent. I cut the old one off, repaired the rusted-out lower section, and welded it onto the new bracket


brackets-old-new.jpg

Last edited by zeem (2023-10-18 08:36:24)

Offline

#7 2024-05-08 14:12:13

Edwards23
Member
Registered: 2024-05-08
Posts: 1

Re: Help locating sheet metal engine mounting bracket

Don’t suppose you have a link or a part number for the plate mount you found in the picture can not find it anywhere and mine has collapsed any help much appreciated

Last edited by Edwards23 (2024-05-08 14:13:13)

Offline

Board footer