The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

You are not logged in.

#1 2020-08-07 14:27:23

garlicmobile
Member
Registered: 2020-08-07
Posts: 1

Help locating sheet metal engine mounting bracket

Hello Folks,

My 2002 2.0HDI Dispatch has 175000 on but drives like a spring chicken and I love it.
I am however in the process off sorting a few rust problems.

There is not much left of this sheet metal bracket which bolts onto the chassis and holds the gearbox side engine mounting.

IMG_1031.jpeg

I'm really struggling to find another; they all seem to have been taken or are totally rusted with holes on the scrap vans I've found.

Has anybody come across a good source for parts like these / drawn one and had it made up /or spotted a newly arrived Mk1 dispatch arrive at their scrappers?

Any help much appreciated.

part no. 1813 42
IMG_1032.jpeg

Thanks for any help

Last edited by garlicmobile (2020-08-07 15:05:04)

Offline

#2 2023-06-08 14:03:32

Jantheman
Member
Registered: 2023-06-08
Posts: 2

Re: Help locating sheet metal engine mounting bracket

Hi, I've got the same issue. Did you manage to source this part?

Offline

#3 2023-06-08 21:51:03

OAT
Member
From: Borders/Dales
Registered: 2017-01-03
Posts: 942

Re: Help locating sheet metal engine mounting bracket

Anything here? :-

https://www.eurocarparts.com/engine-mount

edit.... I think not.  I see it's the mounting plate you need.

Might be worth asking them.

Last edited by OAT (2023-06-08 21:57:40)

Offline

#4 2023-06-09 20:17:44

JohnDragonMan
Member
From: Derby, East Midlands, UK
Registered: 2020-06-02
Posts: 442
Website

Re: Help locating sheet metal engine mounting bracket

here it is on FiatFourm's ePER:
http://eper.fiatforum.com/eper/navi?MOD … &DRW_NUM=2

Fiat part numbers: 1489763080, 1401152880

ill see what i can find...

Last edited by JohnDragonMan (2023-06-09 20:26:38)


- JohnDragonMan
Notice: I have the tendency to void warranties, blow fuses, cause fires, and other fun stuff.
Words of wisdom: Internally rust proof the sills and subframe! both skins!!. There's always user serviceable parts inside. "Oh that shouldn't have happened".
My 2005 Dispatch Camper Project big_smile

Offline

#5 2023-06-18 19:58:34

Jantheman
Member
Registered: 2023-06-08
Posts: 2

Re: Help locating sheet metal engine mounting bracket

Thanks a lot guys! I'm in Iceland for summer and unfortunately can't find it here so will ask my coworker to fabricate a replacement. It was quite easy to get it out, bottom two bolts are gone so it'll have to hold just on top two bolts.
Will post pic once it's done.

Offline

#6 2023-10-17 22:51:26

zeem
Member
Registered: 2023-09-18
Posts: 3

Re: Help locating sheet metal engine mounting bracket

In case anyone else comes across this problem, it appears that the 2007-2016 vans use the same basic bracket, which might make a replacement easier to find. The following picture shows my old one from my 2006 2.0 HDi, and the replacement I found on eBay (after I cleaned and painted it). This was described as being from a 2007-2016 1.6 HDi.

Two differences:

  • The new bracket uses threaded studs and nuts, instead of bolts and captive nuts. This shouldn't make any difference

  • The pipe clip bracket on the side was absent. I cut the old one off, repaired the rusted-out lower section, and welded it onto the new bracket


brackets-old-new.jpg

Last edited by zeem (2023-10-18 08:36:24)

Offline

#7 2024-05-08 14:12:13

Edwards23
Member
Registered: 2024-05-08
Posts: 1

Re: Help locating sheet metal engine mounting bracket

Don’t suppose you have a link or a part number for the plate mount you found in the picture can not find it anywhere and mine has collapsed any help much appreciated

Last edited by Edwards23 (2024-05-08 14:13:13)

Offline

#8 2024-05-27 10:48:58

zeem
Member
Registered: 2023-09-18
Posts: 3

Re: Help locating sheet metal engine mounting bracket

Edwards23 wrote:

Don’t suppose you have a link or a part number for the plate mount you found in the picture can not find it anywhere and mine has collapsed any help much appreciated

I've got the following part number information in my notes:

  • Fiat 1489763080

  • Citroen 181376

  • Peugeot  1813 76 01 (Since OPR 08876)


I don't have a link because I bought mine off eBay and the listing's no longer visible. The seller's eBay store is here, but it doesn't look like they've got another one at the moment:

https://www.ebay.co.uk/str/dksalvageautospares

It took me three months to find it, although I had previously found good-condition brackets for sale in France and Spain. The problem with the ones from abroad is that they mostly don't seem to want to send to the UK or don't reply to messages enquiring about postage.

Offline

#9 2024-10-25 14:20:11

Muellerturbo
Member
Registered: 2024-10-25
Posts: 1

Re: Help locating sheet metal engine mounting bracket

Hello folks...
i had the same problem 6 weeks ago with my Scudo Combinato (Year 2004), unfortunately in a holiday in Italy. The bracket collapsed, it could not be repared in Italy because the parts are no longer available at FIAT.
So it was transported back to Germany and here i could get a brandnew bracket part nr. 181376  from Peugeot in France without any problem, it took about two weeks until it was here, payed about 120 €.
The main problem was to get out the completly rusted bolts (thousand thx to my mechanic), took a couple of hours.
If somebody needs information about where to get the bracket just contact me.....khd61@gmx.de...
may be i can help you .....
Sry for my English....Hello from Germany from a very happy Scudo driver....(love this car)... smile

Offline

Board footer