You are not logged in.
Pages: 1
Thank you, that helps A LOT.
Hi everyone i have just bought and fitted a set of alloys to my van so no longer require the
15” steel wheels
all have road legal tread
2 are vanco 2 tyres lots of tread
1 has a almost brand new tyre which has done less than 100 miles
1 tyre is legal but i wouldn’t really say it’s a great tyre as it’s a bit old
all steel wheels are good and happy to sell single wheelsthanks
I can see it’s an old post, but going to try anyway. I don’t suppose you have these stashed away in your garage somewhere. Only need one. If you do.
I finally managed to source a single front seat for my van after removing the bench seat. Same year, slightly higher model, excellent condition. £20 and it made my day.
When I removed the bench seat the rear bolts came out with ease. The front bolts were seized after a couple of turns- so in my frustration I took the heads off with an angle grinder just to get the seat out. I’m a Brute force kinda gal when I get frustrated and I needed that bench seat out badly for reasons I won’t detail right now.
With a little more time and patience I’ve managed to get the remainder of the bolts out with some magical Jenolite.
Now I need new front bolts. They are smaller than the rear and have no idea what size thread I need to buy to replace them.
I know in theory I could go back and forth to Screwfix/local Autostore, but since I live in the arse end of nowhere, it’s a day trip for a single journey.
Any idea what size I can just call ahead and ask for??? The remains of the current ones look like shrapnel from a military exercise gone wrong. Im looking for thread size.
Any ideas?
Depends on your engine/fuel pump combination
Both the 1905cc XUD9 and 1868cc DW8 engines will run on it happily even up to 100% veg oil. But you *have* to check that you have the Bosch fuel pump. If you have the Lucas I think you can get away with 50:50
The 2.0 HDi will run on it but I'm not sure how much of a veg:diesel ratio is safe
I have a 2003 1.9D , my wife runs a kitchen and I can get a tank full of used oil a week easily. I’ve filtered veg oil before and cleaned using methanol, I’m wondering whether the issue with the Lucas pump has to do with viscosity? Would the Lucas pump be ok with filtered and cleaned oil, or should I just mix 50:50 to be safe?
Pages: 1