You are not logged in.
Pages: 1
Just done this and a wee update
Jack up van on one side and put an axle stand way inside under the chassis leg. Keeps work area clear.
Put your trolley jack under the coil spring but don’t jack up yet
Remove nut from bolt holding bush in place , this is a dog to get off. Coat with WD40 overnight and heat till it glows with a plumbers torch worked for me.
Jack up under coil spring to take load off bolt and remove.
Lower jack and the bush is easy to work on. You don’t need to remove any other bolts , shocker or coil spring.
I used an electric reciprocating hack saw to make a cut through the outer metal sheath . Couple taps with small chisel and it was out .
Coat new bush and housing liberally with copper grease (I left bush in freezer overnight )
Seat bush and tap in to place with a large socket (35mm)
Jack back up put bolt in . Done
Simple to do in around an hour
hi all
2006 expert 1.9hdi .Weird issue with noise from gearbox diff' >loud grumble at certain speeds , notably around 40mph but disappears when steering is turned ie. only in a straight line , not going around corners.
Noise regardless of gear selected or indeed neutral clutch in or out . Im thinking differential gears or bearings and wondered if anyone had had same and also does anyone know if the diff can be unbolted from gearbox whilst in-situ?
Cheers
Pages: 1