The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

You are not logged in.

#1 2020-05-29 19:31:16

bri31
Member
Registered: 2020-04-29
Posts: 5

headlight conversion

mini_IMG_20200529_131718.jpegmini_IMG_20200529_131716.jpegmini_IMG_20200529_131711.jpeg
hi all does anyone know if this style headlight fits 2001 expert cos my lights are very faded and I can buy these from my local scrap yard cheep
any help would be appreciate
bri31

Offline

#2 2020-05-29 21:34:12

vaz2121
Member
From: Glasgow Living:~ SW. Scotland
Registered: 2015-08-31
Posts: 1,311

Re: headlight conversion

I would be inclined to take similar photos of the headlights fitted to your van and see if mountings match up or how much modifying you'll need to do............
Also with the light and indicator being of a different orientation check the plug or plugs on loom for possible mismatch

Offline

#3 2020-06-07 13:07:17

steve the grease
Member
Registered: 2018-05-20
Posts: 82

Re: headlight conversion

The wings are the same part so the lights should fit. As for the bulb connectors, get the wiring from the breakers  so if its different  you will have it. I think the new lights will foul the old grille so some hacking away may be needed.

Offline

#4 2020-06-09 12:44:47

JohanWinas
Member
From: Gothenburg, Sweden
Registered: 2019-08-21
Posts: 32

Re: headlight conversion

I have both versions, and its not a direct swap.
The plastic grill need changing, maybe the hood as well. And the metall cross member that hold the radiator and grill. As the radiator is different you will probably need to do adapters there to.

Offline

#5 2020-06-12 08:38:18

bri31
Member
Registered: 2020-04-29
Posts: 5

Re: headlight conversion

JohanWinas wrote:

I have both versions, and its not a direct swap.
The plastic grill need changing, maybe the hood as well. And the metall cross member that hold the radiator and grill. As the radiator is different you will probably need to do adapters there to.


thanks for the reply i will look into changing the plugs on the wireing and see if i could mod the brakets
so that i can still allign the lights

Offline

Board footer