The Dispatch | Expert | Scudo Hub

Abywan

Member

Registered: 2016-06-16

Posts: 2

Wanted

Hi all I,m after the bottom shoot bolt fir the near side rear door if anyone has one spare, all rods are in place but bottom doors flop about and not secure

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,181

Re: Wanted

WTF are you on about shoot bolt and rods?  If you are talking the bolts that hold the door to the hinge im sure you have a scrap yard close where you could nick one or two.

Welcome to the forum though

BTW is this what you are after?

Abywan

Member

Registered: 2016-06-16

Posts: 2

Re: Wanted

1)where do these fit round the locking mech ( your photo)
2) the rear van door has a lever attached to RODS ( inside the van door) that connect to the bolts that shoot top and bottom to keep the door from springing open.
Do I need to make it any simpler   

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,181

Re: Wanted

Ah those bolts, you should have said. No 

Take one out the top and see if it fits and this size. I not long changed my doors. The other is hinge bolts but im sure this is what you want. Heads are 10mm

Last edited by Casper (2016-06-17 19:29:38)

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,181

Re: Wanted

Ill put the common as muck size shoot bolts back in the shed then. 

vaz2121

Member

From: Glasgow Living:~ SW. Scotland

Registered: 2015-08-31

Posts: 1,311

Re: Wanted

Ill put the common as muck size shoot bolts back in the shed then.