You are not logged in.
Hi all. Just got this van and drivers door lock is not activating at all. I have removed the lock and tested it in the passenger door and it operates as it should. I have 12 volts to the 4th pin in the lock connector plug. Any ideas where to look for the problem ? I'm guessing possible broken wire but maybe there's s known problem that is common knowledge ? Any advice what to look for and where ?
Offline
what year van?
this section is for up to 2006 I believe and vans after may have different wiring to the earlier ones
Anyway i'd be looking at the harness that runs between body and door on most vehicles
had to do that on the old Galaxy to sort the CL out.
Last edited by RegW (2024-06-03 20:07:49)
When all else fails, RTFM - 2006 Expert 2.0 HDI/110
Offline