The Dispatch | Expert | Scudo Hub

Lynxman

Member

Registered: 2025-08-01

Posts: 6

Some 3D printable parts I designed for my Jumpy.

My van was missing the little plastic piece around the keyhole on the rear door handle so I designed a replacement:
https://cults3d.com/en/3d-model/various … fiat-scudo

My filter box was junk so I made an adapter for my MAF in its stock location to bypass it and added a cone filter to the down pipe instead.
https://cults3d.com/en/3d-model/various … and-others

Last edited by Lynxman (2025-08-01 19:48:30)

Hammersfixeverything

Member

From: Cardiff

Registered: 2024-09-28

Posts: 56

Re: Some 3D printable parts I designed for my Jumpy.

Oh cool, I've been waiting looking online for models for the jumpy start showing up. good work! if you want an idea what to do next, cupholders would be great! The ones in the door are useless

---

The Caretaker of
87 Polo Mk2
97 Corsa B
07 Dispatch WAV

Garethw

Member

Registered: 2025-08-23

Posts: 6

Re: Some 3D printable parts I designed for my Jumpy.

+1 for cup holders.

I like to do a little bit of 3d work but am no where near good enough to create one of the in dash pop out type things (which my Dispatch doesn't have).

I started working on a blank for the holes in the back door pillar but dropped the last one into the pillar never to be seen again!

Hammersfixeverything

Member

From: Cardiff

Registered: 2024-09-28

Posts: 56

Re: Some 3D printable parts I designed for my Jumpy.

If the current cupholders could have an adapter, to move them away from the dash would be great. I guess they are so far forward for the versions that do not have elec windows

---

The Caretaker of
87 Polo Mk2
97 Corsa B
07 Dispatch WAV

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 1,007

Re: Some 3D printable parts I designed for my Jumpy.

If the current cupholders could have an adapter, to move them away from the dash would be great. I guess they are so far forward for the versions that do not have elec windows

In my MK1 they didn't clear the winders when in use anyway. 
They also fired scalding coffee to the roof lining if the door was slammed. 
The wide mouth of standard paper cups hitting the door jamb.

OAT

Member

From: Borders/Dales

Registered: 2017-01-03

Posts: 1,007

Re: Some 3D printable parts I designed for my Jumpy.

Are these the standard ones for MKII's

------
FIAT SCUDO / PEUGEOT EXPERT / CITROEN DISPATCH CUP HOLDER

2007 – 2015

https://www.ebay.co.uk/itm/186878802024 … =view_item

------

HOW much???