You are not logged in.
Pages: 1
Hi,
My first time on here, so go easy with me. lol.
I have a 2015 (64 plate) Dispatch Combi LWB. My O/S rear tyre is slightly low,
and the tyre pressure warning light is on.
I understand that I have to go into the radio to reset this. I have seen online that I need to
find 'Vehicle Configuration'? problem is I don't have that come up as an option.
Anyone have that year/model, and able to run me through the process to reinstate/reset
the light?
Appreciate any help.
Thanks.
Offline
Not many of us dinosaurs have such modern "improvements" I don't think. I am more amazed every time I hear more of them.
Any of this any use:-
There’s a few different ways to reset the tyre pressure monitoring system for the Mk 3 Citroën Dispatch.
Tyre Pressure Monitor Button
If your version of Citroën Dispatch has a tyre pressure monitor reset button, simply press and hold the button for around 3 seconds until you hear an audible beep. After the beep, the system will be reset to the the values of the current tyre pressures.
Reset using the Audio System
Citroën Dispatch Mk 3 tyre pressure reset audio system
Reset using the Citroën Dispatch audio system
The wording used may vary depending on your version of Citroën Dispatch such as ‘reset’ or ‘initialisation’. Using the audio system on your vehicle:
Press the Menu button.
Go to Personalisation-configuration.
Select Under-inflation initialisation to reset the tyre pressure monitor.
Reset using the Touch Screen
Use this method if your vehicle has the touch screen system.
Citroën Dispatch Mk 3 tyre pressure reset touch screen
Reset using the Citroën Dispatch touch screen
Press the Driving Menu button.
Select Under-inflation initialisation.
Select Yes to confirm the instruction to reset the tyre pressure monitor.
Try to check tyre pressures at least once every month and/or before a long journey. Driving with under-inflated tyres reduces their life, impairs road handling and increases fuel consumption. Tyre may also heat up increasing the risk of tyre damage or possible blow-out.
https://www.dash-lights.com/citroen/dis … ure-reset/

Offline
Evening OAT,
Many thanks for your reply.
Unfortunately, mine is the mk2 not the mk3. I have no reset button, and if I try to go in through
the radio - it gives me no configuration options.
I was hoping someone with the same age vehicle, may have come across this before.
I appreciate your help, all the same.
Offline
Is it the Navidrive system?
Does it offer Diagnostics?
Offline
Hi,
I'm not sure if the Navidrive system is off the radio, or with a screen?
I don't have a screen.
If I go into the menu, it gives me these options: Display adjust, Units, Languages
and Options. If I go into options, it just flashes: Diagnosis/Consult/Abandon.
If I press Diagnosis it just flashes what is set on the vehicle i.e child locks active etc.
If I press Consult, it just goes back to Diagnosis.
If I press Abandon, it just goes back to Menu.
No other options at all, that I can find.
Thanks.
Offline
I Have a 65 plate car with thes tyre monitor things and if a tyre gets low in pressure, the light goes off again If I pump tyre up to the correct pressure ..............................
Also I've had where the battery has gone flat and had to take tyre off and renew battery as it wasn't sending a signal and ended up with same result when it needed a new battery............................................................
I believe Americans have needed them from around 2007 and we've now followed suit ..................
Offline
Pages: 1