The Dispatch | Expert | Scudo Hub

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Drivers front seat for Expert 2016 1.6 ('66') plate

Hi Guys
After some Expert advice please!! I need a second hand drivers seat for a Peugeot Expert 1.6 2016 with a '66' plate. It's a mk 3 model. What drivers seats will fit my vehicle and from what years? I'm presuming Dispatches and Scudos from the same year .. but will any older models front drivers seat fit?
And has anyone got one??
Many thanks
David

tee_cee

Member

Registered: 2016-03-18

Posts: 636

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

All the older seats will fit, as long as you have the base that fits to the floor.

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Bugger!
Does that mean my old seat from an Expert 2005 would have fitted? I've just had to scrap mine because of ULEZ. But would i have had to change bases as well.... and would that fit the floor of a 2016? Many thanks for responses  ....

tee_cee

Member

Registered: 2016-03-18

Posts: 636

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Ah its the newer (MK4?) version. Sorry I don't know if they are the same as the older versions. If you want to try to measure the pitch on the floor I can check against my seat (2015 Mk3)

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Thanks Tee Cee

My Service schedule says it's a Expert 3 Tubo Diesel DV6UC 1560 4 CYC D TB ECH DR ...so i'm presuming it's a Mk 3! Number plate is FV66 YBF.
I'm presuming only a MK3 drivers seat would fit ??

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,630

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

I know from personal experience that Mk2 seats fit the same bolt holes as my Mk1 van. Fingers crossed the same is true between Mk2 and Mk3

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

tee_cee

Member

Registered: 2016-03-18

Posts: 636

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

There is a bit of confusion over versions, because the 2004 facelift is sometines classed as MK2. I know that Service box calls my 2015 an Expert 3. Anyway here are the variants https://www.car.info/en-se/peugeot/expert
I assume that yours is Peugeot Expert 3rd Generation 2016 - 2019. Maybe you could measure the pitch between the mounting bolts. I did a quick measure iand it's about 42cm left/rign and 23cm front/back. I'll be taking the seat off, at the weekend so I can get a mere accurate measurement.

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,630

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Yea those versions align with my expectations. Mk1 is 1997? to 2006 with a facelift in 2004. Then the Mk2 is the new shape from 2007

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Many thanks for info Guys .

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Also i'm after the rubber cab floor for a mk 3 , complete with sponge backing.... mine is soaked and not repairable. I've seen cab floors for 2015 models on ebay ... would they fit a mk 3??  I know i'm back to the same problem as with the seat but don't know where else to get good advice ... any help appreciated.

tee_cee

Member

Registered: 2016-03-18

Posts: 636

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Just checked the seat bolt hole pitch, and it is 42cm left/right. However there are 2 holes at the back at 23cm and 30cm. So the seat bolts are aligned at the front, but staggered at the rear.

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,630

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Just checked the seat bolt hole pitch, and it is 42cm left/right. However there are 2 holes at the back at 23cm and 30cm. So the seat bolts are aligned at the front, but staggered at the rear.

That sounds similar to mine. There's 4 normal bolts and one chunky one

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

hockleydave

Member

Registered: 2023-11-22

Posts: 7

Re: Drivers front seat for Expert 2016 1.6 ('66') plate

Thanks guys for all your info.