You are not logged in.
Pages: 1
Due to some issues with the ECU I need to have the whole config checked out.
However if my life depended on it I can't find the immobiliser.
It's 2001, 2.0 l petrol version and according to the testing company I should be looking for a textron imobiliser.
Thanks in advance.
Offline
Long shot but... mine is a few years older and has a factory fitted immobiliser which had a key pad behind a fold down flap in the dash, to the right of the steering column.
Any chance they tucked the unit in there?
(Come to think of it, what is there on models without the immobiliser keypad?)
Last edited by OAT (2024-01-04 19:18:18)
Offline
I'll have a look in a minute but can't recall ever having seen a keypad.. I'll take my flashlight out in a minute and have a look..
The dashboard cupboard does look small.. Maybe I overlooked something there..
Offline
@ OAT
No keypad hidden left, right or middle.
This should be factory installed as well btw..
Been looking for a workshop manual everywhere but can't find anything for this version ("99-07 I believe) only the following model.
Offline
Yea the keypad was only from 1996 to 1998ish. Neither of my Dispatches have it, although my '98 Synergie does
Surprised to hear of a petrol model on here! I assume it works differently than on the diesels where it affects fuel delivery
2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt
Offline
I'll know as soon as I found the darn thing... but so far I have no clue to where it is..
(mine is converted to lpg btw and in use for our local k9 sar group.. Without this car we are essentially grounded for the moment..)
Offline
If it's just a small black box, could it be under the flap with the ECU?
Offline
There is another small box there.. But as far as I know that is part of the lpg installation.. and misses the markings from the image that I was sent..
Offline
And we finally found the blasted thing...
When your supplier is adament that the part looks like the picture they send.... And it ends up to be a different brand/ type all together..
Offline
Pages: 1