The Dispatch | Expert | Scudo Hub

Paul25

Member

Registered: 2024-02-11

Posts: 2

MK2 Dispatch glove box removal

Hi All Looking for some advice. I have the heater problem that seems to befall us. I was looking today at how to remove the glove box. Are ther any instructions or any advice would be grately appericiated. TIA Regards Paul

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,620

Re: MK2 Dispatch glove box removal

They all identical MK1, Mk2

In mechanism or in shape? Does that imply I could swap a Mk2 box into my Mk1?

This is assuming when we say Mk2 we mean the post-2007 model

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

Paul25

Member

Registered: 2024-02-11

Posts: 2

Re: MK2 Dispatch glove box removal

Thanks is it the back of the box that comes out or the complete thing by undoing the little torx s. Screws Looks like you have to remove whole dash sorry if i appear thick . Thank you for you advice Regards paul

Last edited by Paul25 (2024-02-12 13:14:42)

roopid

Member

From: Kendal

Registered: 2024-02-25

Posts: 38

Re: MK2 Dispatch glove box removal

I just took my 2009 Mk2 (RHD) apart to see why the lid flaps about (usual broken 'hinges', I can see now).

I removed the 3 Torx screws visible with the lid open, then opened the door, pulled back the door seal a bit, then freed the box and side air vent together (I have one finger on each one, in the photo). I think I took out the small tray as well.

I had to disconnect the glove box light before I could move it out.

Once out, I found the 'hinge' mount has 2 more Torx screws holding it, as well the 3 plastic tabs. I had to open a folding bit to reach the screws.

Now I have to work out how to fix it. Maybe I can find some glue to stick old rubber inner tube to the EDPM lid?

Roops