The Dispatch | Expert | Scudo Hub

Jehb

Member

Registered: 2017-06-23

Posts: 48

Difference between facelift and pre facelift models?

Hey all,

Potentially going to look at a Peugeot Expert taxi the same colour as my Fiat Scudo van to get some bits off. Mines a 2003 but this is the facelift model.

It looks the same except the bumpers, what bits are different between the two? I want the doors with the windows already in to help save some hassle there but could they be slightly different in shape/size?

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,180

Re: Difference between facelift and pre facelift models?

Same and if same colour and yo can be arsed and like you can take the  new front end and stick it to your van as far as i know.

vaz2121

Member

From: Glasgow Living:~ SW. Scotland

Registered: 2015-08-31

Posts: 1,311

Re: Difference between facelift and pre facelift models?

Same and if same colour and yo can be arsed and like you can take the  new front end and stick it to your van as far as i know.

I agree face lift is just that and you can swap all front bits ..... I also believe if you wish you can stick on the font end and other various bit from the like of the 806, synergy and ulysse

(Or if you wish to be different and can find one here abouts ....a Lancia Zeta)

Jehb

Member

Registered: 2017-06-23

Posts: 48

Re: Difference between facelift and pre facelift models?

Thanks guys, thats good to know, hopefully I can convince my girlfriends parents to put the doors in their big car as I'll only be in my fiesta - we're going up to the area due to a funeral though so perhaps not the best time but saves me making the 4 hour journey again.

I did think about taking the front end although I do like the retro-ness of mine, plus then I'd have a Dispatch front end on a Scudo

cliffo

Member

Registered: 2017-08-04

Posts: 128

Re: Difference between facelift and pre facelift models?

Watch out for your doors having plastic mouldings along the the lower quarter. If you remove these then it leaves the mounting holes...

Jehb

Member

Registered: 2017-06-23

Posts: 48

Re: Difference between facelift and pre facelift models?

Watch out for your doors having plastic mouldings along the the lower quarter. If you remove these then it leaves the mounting holes...

Yeah I noticed that, and other than the impracticality of collecting the bits, that was another reason I chose not to bother in the end.

Will be much easier to just drive somewhere when the vans running and have windows fitted

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,180

Re: Difference between facelift and pre facelift models?

Measure your door gap for your window. I presume you want sliding ones. My van (LDV Convoy) the mini bus version has two sliders on each side. ONe is 99cm wide and the other 82cm. Both are 50cm tall. Cutting the hole is easy with a drill to start the pilot hole and finishing with a jigsaw. Sikafles or the likes to seal and they pop rivet in place.

Casper

Member

From: East Lothian

Registered: 2015-12-20

Posts: 2,180

Re: Difference between facelift and pre facelift models?

Oh. pay 40 to 60 quid on ebay for a 2nd hand one. 30 for a solid glass one what will be the middle window and 92cm wide.