You are not logged in.
Pages: 1
Hi everyone ,
I going to try and put some pictures on here showing a wire that probably needs to be attached to something, but I can't see what.
Any help would be greatly appreciated.
Due to faulty ignition I burnt out my starter motor and I had to replace SM and ignition barrel. So far van turns over but won't start. Could be immobiliser, but want to eliminate this wire first. The guilty wire is the pale green and white wire. A similar wire seems to be connected to the fuel pump?
Last edited by neil301 (2018-09-20 20:01:28)
Offline
What engine?
I'll have a look at mine tomorrow if no one has replied.
Is the dangly wire cut out of that sleeving?
Offline
yes, it was inside that sleeving. engine is 2.0 hdi peugeot expert 2005. cheers
Last edited by neil301 (2018-09-21 18:23:33)
Offline
Mine 1.995 TD wouldn't help then sorry.
Someone here should have an idea though but it's been a bit quiet lately.
Offline
Pages: 1