The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

You are not logged in.

#1 2016-02-25 20:23:16

Casper
Member
From: East Lothian
Registered: 2015-12-20
Posts: 2,180

Throttle Cable

Easy job? Mine snapped today. Lick 5 min walk from home so choc block fix. New cable arrive tomorrow so is it an easy one man job?

Offline

#2 2016-02-28 12:27:19

Casper
Member
From: East Lothian
Registered: 2015-12-20
Posts: 2,180

Re: Throttle Cable

OK. The cable came from eurocarparts at £30 posted  yikes  waste of money. Only part i used was the inner wire cable as the engine end comes with a couple of different shaped choc block type ends.

Soooo, if anyone is needing a new cable buy a long push bike brake cable and a brass choc block. Save a few quid, unless you need to change your outer sleeve that is.

Offline

#3 2016-02-28 13:52:48

vaz2121
Member
From: Glasgow Living:~ SW. Scotland
Registered: 2015-08-31
Posts: 1,311

Re: Throttle Cable

While back I got a cable, a firstline brand......IIRC

Turned out that the cable on the 306 was incorrectly fitted/routed,
Garage said should keep it......... It would fit the van as well as every other PSA diesel car/van ETC of that ilk...

Returned it anyway
Had a 101 bits in the bag ....It looked like the Throttle cable version of flat pack furniture with all the extra bits you didn't need ......


So guess you've just answered why

Offline

#4 2016-02-28 21:16:43

Casper
Member
From: East Lothian
Registered: 2015-12-20
Posts: 2,180

Re: Throttle Cable

See at the end of the cable in the engine bay. The cable clips onto a white plastic/nylon pulley what is screwed onto the arm to accelerate.  Does your white plastic/nylon part pivot as the arms moves? Mine is solid, i manage to move it slightly as it was facing the wring direction causing a bend in the cable.

Offline

#5 2016-02-29 21:03:19

vaz2121
Member
From: Glasgow Living:~ SW. Scotland
Registered: 2015-08-31
Posts: 1,311

Re: Throttle Cable

P1120359.jpeg
This is what my cable looks like at throttle actuator .....Yes that bit the cable clip and spring  slots into pivots

Offline

#6 2016-03-01 09:49:02

Casper
Member
From: East Lothian
Registered: 2015-12-20
Posts: 2,180

Re: Throttle Cable

Yip thats the jobby. Looks like i have some freeing up to do. Bloody solid it is. Took me an age just to turn it a few degree.

Offline

Board footer