You are not logged in.
Pages: 1
Hi all,
I've got a 2010 Scudo LWB 8 seat minibus/combi van.
I would like to fit some front seats with swivels, and I have read that 807/C8/Ulysse seats will fit.
Has anyone done this and if so have you got some pictures of them fitted?
Also, has anyone fitted different seats in the back on the standard mounting points?
Some of the Vito seats look like the mountings are the same, like these:
https://www.ebay.co.uk/itm/NEW-Mercedes … 4217996340
In picture 5 you can see the single seat looks like it clips on the side of the double in the same way as mine.
Anyone ever tried these in the back?
Offline
807/C8 seats (if you can find them) into one of these is a quite popular Straightish swap thing to do ............
I'd go as far as to say same for rear................
But another manufacturer ................. Either mods or lots of research (Both) as your doing would be the case
Offline
I think the rears are different, I had a C8 before, the C8 ones do slide backwards and forwards a bit where the van ones just hook in one place.
I may have a lead on some front seats, will post back with pictures if I get it sorted.
Offline
I think the C8 seats will fit the MK1 but not the MK2 as the floor pan is different?
Offline
I think the C8 seats will fit the MK1 but not the MK2 as the floor pan is different?
C8's will fit. The fixing centers are the same - but bolt diameters may be different.
Offline
Pages: 1