The Dispatch | Expert | Scudo Hub

JohanWinas

Member

From: Gothenburg, Sweden

Registered: 2019-08-21

Posts: 32

ET40 Alfa Romeo alloys, will they fit?

I got hold of a set of 15" Alfa Romeo alloys, 5/98 and 58.1mm center bore.
But they are ET40 instead of the normalt ~ET30 the expert has.
Do you think it will work and look ok? Or do I need to get spacers? Would 5mm spacers work?

Firemoth

Member

From: Bacup, Lancashire

Registered: 2019-07-05

Posts: 55

Re: ET40 Alfa Romeo alloys, will they fit?

I got hold of a set of 15" Alfa Romeo alloys, 5/98 and 58.1mm center bore.
But they are ET40 instead of the normalt ~ET30 the expert has.
Do you think it will work and look ok? Or do I need to get spacers? Would 5mm spacers work?

These are Alfa wheels. Can't remember which model but there are no spacers or anything and I don't have a problem

---

If in doubt, give it a clout!

JohanWinas

Member

From: Gothenburg, Sweden

Registered: 2019-08-21

Posts: 32

Re: ET40 Alfa Romeo alloys, will they fit?

That looks nice.
Got a set for next to nothing but they need some fixing up before getting som rubber on them, will give it a go and see if it works ok.

Tiree

Administrator

From: Galloway

Registered: 2013-09-20

Posts: 331

Re: ET40 Alfa Romeo alloys, will they fit?

That looks nice.

I concur. Your vehicle always catches my eye Firemoth!

---

2006 Citroen Dispatch 2.0HDi bought in July 2013 - Partial camper conversion ........

Firemoth

Member

From: Bacup, Lancashire

Registered: 2019-07-05

Posts: 55

Re: ET40 Alfa Romeo alloys, will they fit?

Compliments? I'm not used to this 

---

If in doubt, give it a clout!

JohanWinas

Member

From: Gothenburg, Sweden

Registered: 2019-08-21

Posts: 32

Re: ET40 Alfa Romeo alloys, will they fit?

Well I had a go at this. I just bought a new van, a 2006 instead of the 1999 in the picture. And they fit the old van but not the new one, they rub against the callipers.
Tried eyeballing it and it wont clear even with a 10mm spacer.