dispatch 1.6 HDI limp mode,, need help

Crimbo · 2021-05-16 18:10:45

hi first time posting--bought this van last year only driven for 15 mins, then went into limp mode, so I changed (wait for it) new EGR, TURBO, injector seals kit, driven for 20 mins then 1 injector was knocking so had to get new injector studs & nut kit + injector seals, then van starter was just clicking so I bought a new starter motor and new battery and fitted another wiring harness, still just clicking and non-start, now this is what my diagbox is saying, sorry about the long story sad sad sad

Anchor1979 · 2021-05-18 07:47:33

Hi Crimbo and welcome.

Is this the 1.6 hdi from the mk3 (2007 to 2015)?

I too had quite a few issues with my 1.6hdi, the most recent been the bsi unit in the engine bay on the off side. It had always had a few electrical faults show up but nothing to stop the van from running. Then one day it started and ran for a few seconds the cut out, but then wouldn't restart. Plugged a snap on code reader in and got a few faults as normal but also now had a fuel regulator issue amongst others.

Short version is I tried a few cheaper items first such as fuel pump solenoid and fuel filter, but ended up been the bsi unit in the engine bay. Once I'd fitted that, all my other electrical faults also disappeared.

Not at cheap fix and best part of £300 for the part from the dealer though.

vaz2121 · 2021-05-19 10:07:58

As Anchor1979 says could be BSI as with 3 readings 3 diffrent read outs ..........
However there is one perminant and thats turbo pressure..........
When I had the 307 2.0L HDI one of it's irks was boost............
It had a VVT [Variable Vane Turbo] and the Vanes would stick due to rust or being gummed up and not regulate the boost..........
I changed vacum actuators ETC to no avail along with various other issues and after it was gone I was told .......
Fill the VVT exhaust housing with oven cleaner and leave it for 2 ...3 hours to do it's thing before cleaning out the stuff .........

It's like being blindfolded and pinning the tail on the Donkey ..........
Giving a prognosis ....
You could well have more than one issue .........
And we're not even close.............

Old adage....
A Diesel needs 3 things to Run .........
"Compression" .......
"Fuel" .......
"Air" ...........
Put a computor in charge it needs 103 things

Petrols are much the same with a spark though

Sorry not being particularly helpful

Crimbo · 2021-05-19 16:21:47

hi, thanks for the reply, i already bought another BSI for £65, today I cleaned the intake manifold pressure sensor, and my diagbox cleared all the fault codes'' but still a non-start? hmm

Anchor1979 · 2021-05-22 12:18:57

Crimbo wrote:

hi, thanks for the reply, i already bought another BSI for £65, today I cleaned the intake manifold pressure sensor, and my diagbox cleared all the fault codes'' but still a non-start?

Was it a used one? I was tempted but decided to go with a new one due to the number of different models and potentially having issues.

Have you checked you've got fuel going to the injectors?

Crimbo · 2021-05-23 08:39:28

HI, anchor1979, my fuel pump solenoid is making a loud noise' so I think ill go for a new one, I bought a Common Rail Leak Off Tester but didn't get to use it, smile and the BSI numbers all matched but I'm going to put my old one back in today and see if any codes come up, will let you know? TIA. smile

Anchor1979 · 2021-05-23 08:49:07

Crimbo wrote:

HI, anchor1979, my fuel pump solenoid is making a loud noise' so I think ill go for a new one, I bought a Common Rail Leak Off Tester but didn't get to use it, and the BSI numbers all matched but I'm going to put my old one back in today and see if any codes come up, will let you know? TIA.

I ended up getting one from ebay if I remember correctly, solenoid that is, as peugeot don't sell just the solenoid.

https://www.ebay.co.uk/itm/FUEL-PUMP-PR … 890.l49286

Let us know how you get on.

Crimbo · 2021-05-23 08:56:00

anchor1979, big thanks, this one will also fit (lol) well it says it will---. https://www.ebay.co.uk/itm/332484845278 wink

Anchor1979 · 2021-05-23 11:23:53

No worries Crimbo, from memory was a little pain in the arse to replace. At one point I thought it may need the entire pump, which I think was about £300 mark from a local company called pf Jones.

Good luck and fingers crossed it solves it.

Crimbo · 2021-05-24 07:08:15

ill let you know the outcome, thanks.

The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

#1 2021-05-16 18:10:45

dispatch 1.6 HDI limp mode,, need help

#2 2021-05-18 07:47:33

Re: dispatch 1.6 HDI limp mode,, need help

#3 2021-05-19 10:07:58

Re: dispatch 1.6 HDI limp mode,, need help

#4 2021-05-19 16:21:47

Re: dispatch 1.6 HDI limp mode,, need help

#5 2021-05-22 12:18:57

Re: dispatch 1.6 HDI limp mode,, need help

#6 2021-05-23 08:39:28

Re: dispatch 1.6 HDI limp mode,, need help

#7 2021-05-23 08:49:07

Re: dispatch 1.6 HDI limp mode,, need help

#8 2021-05-23 08:56:00

Re: dispatch 1.6 HDI limp mode,, need help

#9 2021-05-23 11:23:53

Re: dispatch 1.6 HDI limp mode,, need help

#10 2021-05-24 07:08:15

Re: dispatch 1.6 HDI limp mode,, need help

Board footer