You are not logged in.
HI,
I have the dispatch DW8 1.9 non turbo. I'm trying to read live data using my scanner to help track down an odd fault, but there is clearly some missing data! I know it is a simple engine, but was hoping to extract a little more out of the ECU brain
Info i can retrieve
*Temperature
*RPM
*Throttle Position
*timing advance - requested
*Timing advance - actual
*Cooling fan - on/off
*glow plugs - on/off
and a few others things
There are some glaringly obvious things i cannot read
*MAF sensor
*Needle lift sensor etc
it would suggest my scanner cannot access, so maybe i need to use another scanner?
my scanner is the Autel DS808 (https://www.obdadvisor.com/autel-maxidas-ds808-review/)
, so not a Micky mouse type one.
Just wondering what data others have been able to access?
Thanks
James
Offline
Sorry James... Analogue Luddite here.

Should be someone more use along though.
Last edited by OAT (2019-05-05 17:08:11)
Offline
Herein lies the problem. OBD/EOBD is a protocol agreed originally in the USA , previous to this every manufacturer used a different plug and different software to access the engines running data. Cue the yanks . " Right if you want to sell cars here , it has to comply with this standard spec OBD " Never slow to miss on a good idea Europe rapidly followed suit hence the OBD and EOBD. However there is still lots of info not covered by the protocol which you need manufacturer specific software to access. Lexia etc. I have a virus laden cracked copy of Lexia . My mate is in a garage with multi vehicle diagnostic machine , a bargain at £3.5k plus £100 a month for upgrades. Which explains why garages charge a lot for diagnostics.
Last edited by steve the grease (2019-05-12 19:06:06)
Offline