You are not logged in.
Pages: 1
just spotted theses beauties
http://www.ebay.co.uk/itm/PEUGEOT-807-C … 1535056066
Offline
Rather nice for the price. Just looking for the single front myself what i may have for little money and a swivel plate for another £25. Should find out tonight.
Offline
if i dident already have swivels i would have snap theses up
Offline
Picture number 10
http://mytintent.blogspot.co.uk/p/page-six.html
Bloody thing weighs a ton. Got a chunk for a seat belt that i will angle grind off to bring some weight down.
Offline
the walk through is dam useful especially when its pissing down
I had odd coloured single seats in my vw, keep us updated on the swivel plate
Offline
If i get another cheap deal on a drivers side one i take it the seat misses the handbrake on the on/up position.
Offline
If i get another cheap deal on a drivers side one i take it the seat misses the handbrake on the on/up position.
Excellent....Checked out you photos.....Van's coming along nicely.... was that seat base a universal or 806, Scudo, Dispatch ETC specific .... I only have swivel on passengers side as cabinet right behind drivers seat.... however have thought in replacing passengers swivel plate and adding a secure box along with it (passports , documents ETC) as the one I used in the 306 is getting a little worse the wear ...... used it in a number of vehicles now..........
Offline
you pull up on the handbrake then a liitle pull on the button hey presto the handle lays down so the swivel seats can clear, its a throw back to the 806/synergie 
Last edited by monkeynut (2016-05-02 10:56:23)
Offline
Excellent....Checked out you photos.....Van's coming along nicely.... was that seat base a universal or 806, Scudo, Dispatch ETC specific .... I only have swivel on passengers side as cabinet right behind drivers seat.... however have thought in replacing passengers swivel plate and adding a secure box along with it (passports , documents ETC) as the one I used in the 306 is getting a little worse the wear ...... used it in a number of vehicles now..........
The label on the plate said it was for a Peugeot boxer/fiat decato and some other. The holes were spot on so easy job. I took an angle grinder to it as there was a large bracket for the seatbelt what the label also said i would have had to take off the seat but that would have been for the larger vans.
Yeah i am thinking of a kitchen unit behind the drivers seat to putting off getting another swivel just now but i am thinking when both turned i could make something to drop into the middle making a bed for the dog.
Offline
First post...
I just picked up a 59 Dispatch Combi and want to swap out the front bench and driver seats for swivel seats. I've trawled the internet but can't find a definitive answer to whether or not 807 seats are a straight fit?
http://www.ebay.co.uk/itm/PEUGEOT-807-C … SwiO9Xig96
Be grateful for any info on these
thanks
Joe
Offline
As far as i know Joe that is what Monkeyballs has in his van and another on the forum but unsure who. Even if the bolt holes are out you can easily get the drill out however i would be taking the gamble and buying them had i had the chance when i was doing the job.
Offline
As far as i know Joe that is what Monkeyballs has in his van
Joe's is a 59 though - are they same setup?
Welcome Joe :-)
2006 Citroen Dispatch 2.0HDi bought in July 2013 - Partial camper conversion ........

Offline
Ah. 
Offline
806 synergie uylsees mk1 bolt straight in allso I found out on the Fiat forum and the Furgovw site that that 807 base s fit
http://www.fiatforum.com/scudo/256856-f … scudo.html
scroll down here you will find out that mk2 bases fit
Last edited by monkeynut (2016-07-27 01:29:18)
Offline
Who is Monkeyballs?
Offline
Thanks for the response guys...
Looking at the thread on that Fiat forum it's still not clear whether 807 / Mk2 seats fit directly the base on my 59 Mk2 Dispatch?
Monkeynut – are you saying 806 seats bolt straight into a mk2?
If I gamble on the seats and it turns out the bolt holes are wrong and I need to drill new ones to match, does this affect my insurance and will there be an issue with seatbelt tensioning?
I'm surprised how little info there is regarding mk2 conversions online? Sorry if I'm asking a lot of questions...
Cheers
Joe
Offline
I would go with the full 807 seats and bases as they are the same base vehicle lots of pics on the furgovw site of mk2 conversions
Offline
Having just looked on furgovw at Mk II models... I am now very motivated to get started on my conversion! There are some lovely examples on there 
Will order up the 807 seats now then... thanks Monkeynut – super helpful!!!
Offline
http://www.ebay.com/itm/PAIR-of-leather … 2117899705
807 seats with bases
Offline
theses are identical to mine(from a 806) but far better condtion
complete with bases too
http://www.ebay.co.uk/itm/Quicksilver-C … 6016.l4276
Last edited by monkeynut (2016-08-08 22:44:53)
Offline
That drivers seat is getting excited 
Offline
Pages: 1