Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

Numeric · 2020-03-15 09:24:38

Hi All,

Can anyone help with the following :-

1. I need the part number for the flexible hose that connects the solid down pipe from the filler neck to the diesel tank. Mine is perished and leaking slightly.

2. I need to replace my 2 x front head lamps as the cases are cracked and or the lower plastic fixing bracket broken. I have got a replacement pair of head lamps for £30.00 from the local scrap yard and got them off the van which some thoughtful person has already removed the front bumper. My question is any advice on removing the front bumper. Looking at my own van I can see that the front grill will come out and the front part of the inner wheel arch in order to access the bumper retaining bolts. Any advice would be appreaciated.

kenbw2 · 2020-03-16 01:48:21

Here's the part numbers for your filling ducts

I'm trying to remember which bolts I had to remove for the bumper. I want to say they were in front of the wheels, accessible from underneath without removing the wheel arch liners. I can't be sure though, and mine were completely seized.

Hopefully this will help:

ClaireTheUnwise · 2025-07-13 14:45:35

kenbw2 wrote:

Here's the part numbers for your filling ducts
https://i.imgur.com/EvAG2ov.png
I'm trying to remember which bolts I had to remove for the bumper. I want to say they were in front of the wheels, accessible from underneath without removing the wheel arch liners. I can't be sure though, and mine were completely seized.
Hopefully this will help:
https://i.imgur.com/EG6iwpv.png

Sorry to revive a 5 year old thread, I also need the part number for the rubber hose between the filler neck and the tank, I think it's item 13 on your diagram but it isn't listed in the table.

I treated Claude to a full tank the other day and found the next fault and was treated to a small patch of diesel on the floor this morning, that pipe has perished.

By the way, which software are you using to look up those part diagrams Ken? That looks great as long as its not super expensive!

kenbw2 · 2025-07-13 16:19:22

Sadly in the last 5 years, Citroen have blocked free access to these diagrams. Used to be that you could enter your VIN and it'd give you every part your specific van was made with

Tee_cee posted some alternatives here: https://dispatchexpertscudo.org.uk/foru … hp?id=1029

It's the closest we've got

ClaireTheUnwise · 2025-07-13 16:30:24

Thanks Ken,

Sadly even the PN wasn't much help.

Looks like I'll be running generic, taking the pipe off and measuring before ordering some generic stuff :-)

I actually needed item 2, ie the straight piece 1505ZZ, found on ebay for £45 as a citroen part.. will take measurements with my vernier when it (and a new vernier caliper) arrives but so far, using a tape measure the get the circumference and the length, I've calculated an outer diameter of 64mm so its likely somewhere in the 55-57mm range, and a length of 150mm.

Will update this weekend if the new part fits with actual measurements..here's to hopefully not getting diesel all over my shared driveway!

Last edited by ClaireTheUnwise (2025-07-15 22:43:03)

The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

#1 2020-03-15 09:24:38

Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

#2 2020-03-16 01:48:21

Re: Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

#3 2025-07-13 14:45:35

Re: Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

#4 2025-07-13 16:19:22

Re: Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

#5 2025-07-13 16:30:24

Re: Diesel Hose Part Number & Advise On Fitting Replacement Front Head Lam

Board footer