You are not logged in.
Pages: 1
Anyone know how to remove the cigarette lighter? Mine is a bit temperamental, probably due to the previous owner depositing 16 years of compacted ash into it, so I want to take it out and replace it. I'm just not sure how to do it with it having a spring loaded ashtray cover?
Offline
Hi mate I have replaced mine it was a few years ago but if memory serves correct, unclip the gear gaiter and undo the two torx screws on the left. I think this releases the entire facia including the spring loaded cover.
Then it's a case of prying the lighter out, one of them plastic clips behind that you need to press. I found this the most awkward part.
I was quoted £35 for a oem one from citroen so I replaced with one like this
http://www.ebay.co.uk/itm/Universal-Car … SwEgVWT0WG
I did have to file a small amount off the facia and add spade connectors to make it fit, the replacement had a separate feed for bulb same as the one I've linked. So it is no longer lit but is still working well 2 years later
Last edited by Watergypsy (2016-09-22 19:35:40)
Be kind to strangers, you may become one some day
Offline
More or less what the wet gypsy said but one the torx are out take out the ash tray to make it easier to get the lighter out. Just pull it as it has the plastic tangs that pop out when pushed in place. As i am tight i just put one in my pocket last time i was in the scrap yard.
Offline
Thanks guys, I didn't think of the gear gator! That reminds me, there's not much left of the existing gator and the gear knob seems to spin freely without unscrewing, are they easy to replace with universal parts? I've never done anything like this before so it's all a learning curve but I refuse to pay somebody to do it, if it ends up looking shit, it'll be my shit 
Offline
Thanks guys, I didn't think of the gear gator! That reminds me, there's not much left of the existing gator and the gear knob seems to spin freely without unscrewing, are they easy to replace with universal parts? I've never done anything like this before so it's all a learning curve but I refuse to pay somebody to do it, if it ends up looking shit, it'll be my shit
I was reading a post on the fiat forum about the gear knob. Apparently its twist and pull till it slips off. Mine is like yours, just spins to so thats another job when i get back from Holiday.
Offline
More or less what the wet gypsy said but one the torx are out take out the ash tray to make it easier to get the lighter out. Just pull it as it has the plastic tangs that pop out when pushed in place. As i am tight i just put one in my pocket last time i was in the scrap yard.
"The wet gypsy" lol you shitbag
I am from a family of working narrowboats hence the username, why you called casper mate?
Be kind to strangers, you may become one some day
Offline
Casper wrote:More or less what the wet gypsy said but one the torx are out take out the ash tray to make it easier to get the lighter out. Just pull it as it has the plastic tangs that pop out when pushed in place. As i am tight i just put one in my pocket last time i was in the scrap yard.
"The wet gypsy" lol you shitbag
I am from a family of working narrowboats hence the username, why you called casper mate?
Just for a change. I am 1888 on other forums that being the date Glasgow Celtic started. Before that i was Rolfe66, Rolfe being my name (yeah i know) and 66 from the Stones version of route 66. I was using GPz750 on the Fiat forum as i had that bike at the time.
Offline
I am michael finnegan on fiat forum and usually russell sprout on others just for comedy value really
Be kind to strangers, you may become one some day
Offline
Thanks guys, I didn't think of the gear gator! That reminds me, there's not much left of the existing gator and the gear knob seems to spin freely without unscrewing, are they easy to replace with universal parts? I've never done anything like this before so it's all a learning curve but I refuse to pay somebody to do it, if it ends up looking shit, it'll be my shit
I put one of the leather gaiters on off ebay was £8.95 but really good quality and fits perfect just a bit of glue needed
Be kind to strangers, you may become one some day
Offline
Dr_Feelgood wrote:Thanks guys, I didn't think of the gear gator! That reminds me, there's not much left of the existing gator and the gear knob seems to spin freely without unscrewing, are they easy to replace with universal parts? I've never done anything like this before so it's all a learning curve but I refuse to pay somebody to do it, if it ends up looking shit, it'll be my shit
I was reading a post on the fiat forum about the gear knob. Apparently its twist and pull till it slips off. Mine is like yours, just spins to so thats another job when i get back from Holiday.
Theres a serated plastic insert in the gear knob if it now spins freely it's now shagged so new knob or glue needed mate, and yes just pull is the only way to remove
Be kind to strangers, you may become one some day
Offline
I fancy an 8 ball just to be a bit chavvy
I'll have a look on eBay and see if I can get a new gaiter, I don't mind a bit of gluing
Offline
8 ball is always cool but the gaiter would just hang loose as it is cable tied to a recess in the knob, I'm sure there is a way to do it though pal
Be kind to strangers, you may become one some day
Offline
Well I finally got a new fag lighter in, it took ages! Had to do a little bit of modifying to make it fit but it's in now, and works
as for the gaiter, not sure what I'll do about that yet but it's definitely coming off, it looks awful!
Offline
Sorry to drag up an old post - came here looking for gear knob/gaitor advice. The gear knob exterior has completely broken away to nothing now, except a rather sharp plastic nubbin. I'm blaming the dog.
Anyway, I'm looking to replace, and possibly replace the gaitor too, but surprised I can't find any online for a Dispatch. Can anybody recommend one that will work?
Similar question as above - wasn't sure how to get off. If I turn 90 deg anticlockwise, and then pull like a train, will it come off, and not damage anything?
Thanks all!
Offline
Pages: 1