The Dispatch | Expert | Scudo Hub

kenbw2

Administrator

From: Preston

Registered: 2017-11-26

Posts: 1,612

Re: Oil Cooler for a 1.9D Scudo 2003?

My 1999 DW8 has

1103 F7 - ENGINE OIL-WATER DISTRIB CHAMB
1104 24 - SEAL
1103 C6 - OIL FILTER INSERT (bolt that goes through the middle)

If it helps, the rubber seal has this text "66,80X73,66-3,43" which I assume has some dimensions in it

The bolt through the middle is "Long 70" - 7cm? I know it's different on the DW8B

---

2000 Citroen Dispatch 1.9TD XUD9 Camper Conversion
1999 Citroen Dispatch 1.9D DW8 Disassembled Camper Conversion
1996 Peugeot 806 1.9TD XUD9 Spare vehicle
1998 Citroen Synergie 1.9TD XUD9 Snapped timing belt

vaz2121

Member

From: Glasgow Living:~ SW. Scotland

Registered: 2015-08-31

Posts: 1,311

Re: Oil Cooler for a 1.9D Scudo 2003?

My 1999 DW8 has

1103 F7 - ENGINE OIL-WATER DISTRIB CHAMB
1104 24 - SEAL
1103 C6 - OIL FILTER INSERT (bolt that goes through the middle)

If it helps, the rubber seal has this text "66,80X73,66-3,43" which I assume has some dimensions in it

The bolt through the middle is "Long 70" - 7cm? I know it's different on the DW8B

That's Weird.............

1103 C6 - OIL FILTER INSERT (bolt that goes through the middle) Long 70 Is exactly what's listed for my (DW8B) van also

But the 306 (DW8) ...Is Listed as .... 1103 J3  - OIL FILTER INSERT DIAM20X150-LONG62,5........ 1103 N0 - ENGINE OIL-WATER DISTRIB CHAMB     EP 37,15

1104 19 - SEAL - DIAM 62,3X71,8-4,75 VALEO THERMIQUE

Lets Not Confuse the situation anyfurther ..............
Clearly best option down Brakers is try like for like first.......... I.E. Van for van on similar age facelift for *** etc  etc ................

Last edited by vaz2121 (2019-08-26 11:47:50)