The Dispatch | Expert | Scudo Hub

Get help & share your Citroen Dispatch (Jumpy) | Peugeot Expert | Fiat Scudo tips

You are not logged in.

#1 2019-03-02 11:02:33

Alcoll
Member
Registered: 2019-02-25
Posts: 2

Front seats

Hello all
I'm new here. I've just bought a 65 plate lwb dispatch. I want to replace the front seats with one's that can swivel. I was wondering about the seats from a C8,807 etc  or something a bit newer eg C4 Picasso with swivel bases.
Has anyone got any experience about this?

Offline

#2 2019-03-02 12:31:45

tee_cee
Member
Registered: 2016-03-18
Posts: 236

Re: Front seats

C8, Synergie, 806, 807, Ulysee - all will fit, though you may need to ream some of the base holes out a bit.
However finding these seats is difficult, and all you will see is high prices & very poor quality.
The single passenger seat can be difficult to get but there are a couple on ebay at the moment
Think carefully about how many swivel seats you need. In my old conversion the passenger seat was never turned.
Another option is to get a swivel plate purpose made for this  Fasp 1305.5131.DX or SX - expect to pay £120 delivered, Though I do know of someone who is selling a passenger plate for £75 plus postage.

Online

#3 2019-03-02 18:55:35

Alcoll
Member
Registered: 2019-02-25
Posts: 2

Re: Front seats

Hiya tee_cee

Thanks for your reply, had a look at a C8 earlier today. The seats were in a right state☹.But they did look as though they would go straight in, do they share the same floor pan, battery location is identical !!!
I'll keep looking but those models are all old & rare now. If anyone knows any other seats that will fit please let me know?.

Offline

#4 2019-06-04 20:21:32

scdroberts
Member
Registered: 2019-05-12
Posts: 1

Re: Front seats

I fitted a pair of leather mercedes slk seat in with a little bit of effort. They look great!

Offline

#5 2019-08-06 15:10:26

Graydog
Member
Registered: 2018-12-26
Posts: 17

Re: Front seats

Fitted a very comfortable pair of Nissan X-trail seats to my 2008 Dispatch the biggest job was shortening the passenger seat chassis but really look the part.

Offline

#6 2019-08-13 22:55:30

Anchor1979
Member
From: Congleton, Cheshire
Registered: 2016-04-02
Posts: 78
Website

Re: Front seats

I'm currently looking into swapping my drivers seat and double passenger for leather seats, which will either be from a 207 or 307. Prices aren't to bad and I've managed to get hold of the single seat subframe for a very reasonable sum.

Will update once I've done the swap and hopefully some pictures too.

Offline

#7 2019-08-23 19:15:23

Anchor1979
Member
From: Congleton, Cheshire
Registered: 2016-04-02
Posts: 78
Website

Re: Front seats

Update: 20ucc leather seats do not fit the subframe base of the expert  sad

Now looking into others for a fit.
Graydog, did the x-trail fit ok on the drivers subframe? What year x-trail were your seats from please?

Offline

#8 2019-08-27 20:18:55

Graydog
Member
Registered: 2018-12-26
Posts: 17

Re: Front seats

Sorry about the delay in replying Anchor, not really sure about the age or model of X-trail just saw a pair locally that look good with very little wear.
I fitted them by using 1.5 inch X 1 inch Rectangular steel tube and off setting the mounting holes It also gave the seat an one inch lift which I think is good benefit for anyone of 6 foot or over.

Offline

#9 2019-08-27 20:54:55

Anchor1979
Member
From: Congleton, Cheshire
Registered: 2016-04-02
Posts: 78
Website

Re: Front seats

Hi Graydog, thank you for getting back to me smile

I've purchased a pair of peugeot 207cc leather seats which I thought might line up with the existing holes but alas no! Might go down the route of adapting the existing subframes to make them fit.

Yes the extra height would come in handy for anyone over 6ft! Not that I'm in that club.

Offline

#10 2019-08-27 21:46:36

OAT
Member
From: Borders/Dales
Registered: 2017-01-03
Posts: 384

Re: Front seats

Anchor1979 wrote:

Yes the extra height would come in handy for anyone over 6ft! Not that I'm in that club.

Careful if you also intend to fit swivels though.  I'm a shorty and with swivels fitted my head is very close to the over head shelf.

Online

#11 2019-08-28 07:43:50

Anchor1979
Member
From: Congleton, Cheshire
Registered: 2016-04-02
Posts: 78
Website

Re: Front seats

Thanks for the heads up OAT, I was intending on fitting a swivel to the passenger side. The issue I have with the 207cc seats is that the runner is about 2 inches wider apart than the existing van seat runner, so currently thinking of the best way to adapt the existing sub frame to enable figment.

Offline

#12 Yesterday 10:33:29

Graydog
Member
Registered: 2018-12-26
Posts: 17

Re: Front seats

Changed my 08 Dispatch for an 2011 Expert Teepee conversion only wish I had taken the X-Trail seats I had installed in my old van they were a lot more comfortable and much better support.

Offline

Board footer